Using Glue when Mounting Hagan Bindings?

The purpose of using glue isn't to retain the screws, it is to seal out water. So binding glue doesn't need to be super strong, but should be cold temperature resistant and waterproof. 

While some people use wood glue, others believe wood glue (and Titebond) are not good choices — being water-based glues, they can lead to rusting of screws. 

Recommendations from a very experienced AT binding mounter:

Another recommendation: Liquid Nails Perfect Glue is a nice acid free polymer that remains flexible and resists temps down to -60. http://www.liquidnails.com/products/high-temperature-adhesive-PG00

Not recommended:

• Moisture cured polyurethane (Gorilla, Titebond Purple). MCPU adhesives usually have a temperature label saying not for use at low temps.
• Loctite is great for small fasteners but not what are essentially wood screws in the wood construction of a typical alpine touring ski. Loctite is just not designed for the needed lubrication, sealing, and strength. Plus it's really expensive for this application.

Epoxies may be more than needed, but as noted above, an option if you want to add some strength.

Anybody have any other recommendations or tips?